Flying Tiger 10m

The Flying Tiger 10 Meter was first launched in 2006 and since then over 100 boats have been produced are sailing world-wide. One design fleets are established in the United States, Australia, Canada, and China with a new fleet movement forming in New Zealand. Designed and promoted as a family club racer, the FT 10 is built to stringent one design specifications with crew and sail limitations that keep cost of campaigning the boat at a reasonable level. Inexpensive to own, fun to sail, and quality construction make the FT 10 a standout in its class.

Specifications

FLYING TIGER 10M SPECIFICATIONS

Designed by Robert H. Perry
Built by Flying Tiger Boats, LLC

LOA:

9.96

32.68

I:

11.974

39.28

Beam:

2.78

9.12

P:

12.243

40.17

DWL:

9.24

30.31

E:

4.540

14.90

Draft:

2.32

7.61

J:

3.696

12.13

Keel Up:

1.00

3.28

ISP:

13.802

48.28

Displacement:

1985

4376

IJS:

5.800

19.13

Ballast

870

1918

Construction

Hull and Deck: Vacuum bagged fiberglass sandwich core construction. All interior bulkheads and furniture molded and cored fiberglass construction.

Deck:

Primary Winches #40 Harken, Aluminum Drum
Secondary Winches #16 Harken, Aluminum Drum
Spinlock Rope Clutches (5)
8 inch Marelon Cleats (4)
Harken Adjustable Jib Leads
Plastimo Manual Bilge Pump Mounted in Cockpit
Stainless Steel Bow Pulpit with LED Navigation Lights
Stainless Steel Stern Pulpit with LED Navigation Lights
Stainless Steel Stanchions and Lifelines
Stainless Steel Handrails on Cabintop (2)
Stainless Steel Tiller with Carbon Fiber Tiller
Removable Rudder Blade in Cassette
Harken Winch Handles (2)

Interior:

Large V-Berth in Bow Section
Oval Opening Hatch above V-Berth
Salon with 2 Settee Berths, Chart Table/Sink and Galley Pump
12V DC Main Electrical Panel with Breakers and Voltmeter
Quarter Berths Aft Under Cockpit (2)
Interior Lighting
Storage Compartments under All Berths

Engine Compartment:

Adjustable Bracket for Lowering/Raising Outboard Motor
Compartment for 25 Lt. Fuel Tank
Compartment Vented with Electrical Blower
Engine Controls Recess Built Into Cockpit Starboard Side
Bridge Deck Hinged Hatch Closure

Mast and Rigging:

Mast, Boom and Prodder Carbon Fiber
2 Sets Tapered Sweptback Spreaders, Aluminum Foil Sections
¼” 1x19 Stainless Steel Standing Rigging, Continuous
Adjustable Backstay
Facnor Jib Roller Furler
Main, Jib and Spinnaker Halyards
Main, Jib and Spinnaker Sheets
Main Outhaul, Cunningham and Boom Vang
Keel Hoist

Manufacturer reserves the right to change specifications without notice